★ Ongoing engagement

Stop hiring a consultant
at the end of every product cycle.

The EMC Architect System puts an experienced EMC architect inside your development process. Ongoing design reviews at every stage, EMC built into how your team works, structured training so your engineers own it going forward.

Apply now Start with free Risk Review
€30,000 / month + VAT  ·  No long-term lock-in after the first month  ·  25% on start
What's included

Three things in one engagement. Running in parallel.

Reviews happen when decisions are being made, not after they're locked in.

📐
Ongoing design reviews
Schematic, layout, stackup, and full system reviews at every stage — not just before certification. Submitted any time, reviewed with specific written feedback.
  • ✓Schematic: component selection, filter topology, decoupling, power architecture
  • ✓Layout: signal routing, placement, copper fill, return path continuity
  • ✓Stackup: layer ordering, reference planes, impedance, dielectric strategy
  • ✓Pre-test review so designs are ready before they go to the lab
🏗️
EMC architecture built into your process
We build the EMC function into how your team works — not a one-time engagement that leaves when it ends.
  • ✓EMC checkpoints at defined stages of your development cycle
  • ✓Review gates, decision frameworks, and checklists your team uses on every product
  • ✓Direct access to Dario: email within agreed window, calls via shared calendar
  • ✓Shared workspace for submitting designs, tracking reviews, permanent record
🎓
Structured monthly training
Not a generic course. Training built around your products, your target standards, your engineers' actual gaps.
  • ✓Up to 5 engineers trained directly by Dario each month
  • ✓EMC principles applied to your specific design challenges and certification targets
  • ✓Bonus: PCB Design + EMC/EMI Course Bundle for up to 5 engineers (€5,970 value)
📚
Knowledge transfer documentation
Everything documented so it stays with your team permanently — not locked in a consultant's head.
  • ✓Decision rationale, review frameworks, product-specific EMC guidelines
  • ✓Your engineers keep the documentation permanently after the engagement ends
  • ✓Bonus: Knowledge Transfer Documentation package (€3,000 value)
€30,000 / month + VAT  ·  25% on start  ·  No long-term lock-in after the first month  ·  Extra seats beyond 5 included: €1,075/seat
Who this is for

This is a team-level engagement. Not a single project review.

The Architect System fits when the problem repeats — the same failures across products, the same gaps in every design cycle.

Right fit if
  • You ship multiple hardware products per year and EMC is a recurring cost
  • You've had test failures more than once and the root cause was the same
  • Your team doesn't have a dedicated EMC function and needs to build one
  • You want your engineers to own EMC, not depend on an external consultant indefinitely
  • The person with budget authority is involved or available
Not the right fit if
  • You have one specific product approaching certification — the Design Audit is the right fit
  • Your team isn't in a position to implement changes across the development process
  • The person who would approve the budget isn't part of the conversation
  • Budget for an ongoing engagement hasn't been considered
Who runs it
Dario Fresu
Dario Fresu
Founder & Principal EMC Architect — Fresu Electronics

Lead Hardware Engineer at ETH Zurich on medical device hardware from concept through IVD certification. Background in EV battery management systems, Swiss industrial EMC consulting, and hardware for Fortune 500 companies. IPC Certified Interconnect Designer. Expert Author for Altium. 80,000+ engineers reached across platforms. 4th-generation electrical professional.

What you're applying for

EMC Architect System — everything included.

Fixed monthly fee. No hourly tracking. No long-term lock-in.

★ Recommended · Ongoing Program
EMC Architect System
€30,000 / month · 25% on start · no long-term commitment

No lock-in after the first month · All prices EUR + VAT

For hardware companies that need a permanent EMC function. Three things in one: ongoing design audits at every stage, EMC architecture built into your development process, and structured training so your team gets better every month. Fixed monthly fee. No hourly tracking. No long-term lock-in.

  • Ongoing design reviews — schematic, layout, stackup, full system — with specific written feedback every submission
  • Pre-test preparation so designs are ready before they go to the lab
  • EMC checkpoints built into your development process
  • Structured monthly EMC training for your hardware team
  • Shared workspace for submitting designs, tracking reviews, and keeping a permanent record
  • Direct access to Dario: email within agreed window, video calls via shared calendar
  • Bonus: PCB Design + EMC/EMI Course Bundle for up to 5 engineers (€5,970 value)
  • Bonus: Knowledge Transfer Documentation your team keeps permanently (€3,000 value)
Add-ons
Extra seats (beyond 5 included)€1,075 / seat
Apply for the Architect System
Apply

2-minute application

Every application is read personally by Dario. Response within 48 hours.

ℹ️
Haven't worked with us before?

Most teams start with the free EMC Risk Review — 5 sessions where we go through your design together before either side commits to anything. If you've already been through the Risk Review, apply directly here.

Dario Fresu
Reviewed personally by Dario Fresu
ETH Zurich · Fortune 500 clients · IPC Certified · Founder, Fresu Electronics
Be specific. This is what Dario reads to decide if the engagement makes sense for your situation.
Read personally · Response within 48 hours · €30,000/month + VAT · No long-term lock-in
✅
Application received

Dario will review your application and get back to you within 48 hours.

If the engagement looks like a strong fit, you'll receive a link to book an introductory call.

If it's not the right fit, you'll get a direct explanation and a relevant recommendation.

Get EMC & PCB design insights by email

Practical content on EMC compliance, PCB design, and hardware engineering — written by Dario, sent when there's something worth sharing.

No spam · Unsubscribe anytime · Your email stays with Fresu Electronics

✅ You're on the list — welcome.
Home EMC Risk Review EMC Design Audit For Companies Courses About Blog
Fresu Electronics
© 2026 Fresu Electronics · Sardinia, Italy